Skip to main navigation Skip to search Skip to main content

Cascade Pumping of 1.9-3.3 μm Type-I Quantum Well GaSb-Based Diode Lasers

  • Leon Shterengas
  • , Gela Kipshidze
  • , Takashi Hosoda
  • , Rui Liang
  • , Tao Feng
  • , Meng Wang
  • , Aaron Stein
  • , Gregory Belenky
  • Stony Brook University
  • Brookhaven National Laboratory

Research output: Contribution to journalArticlepeer-review

41 Scopus citations

Abstract

Cascade pumping of type-I quantum well gain sections was utilized to increase output power and efficiency of GaSb-based diode lasers operating in spectral region from 1.9 to 3.3 μm. Coated devices with ∼100-μm-wide aperture and 3-mm-long cavity demonstrated continuous wave (CW) output power of 1.96 W near 2 μm, 980 mW near 3 μm, 500 mW near 3.18 μm, and 360 mW near 3.25 μm at room temperature. The corresponding narrow ridge lasers with nearly diffraction limited beams operate in CW regime with tens of mW of output power up to 60 °C. Two step shallow/deep narrow/wide ridge waveguide devices showed lower threshold currents and higher slope efficiencies compared to single step narrow ridge lasers. Laterally coupled DFB lasers mounted epi-up generated above 10 mW of tunable single frequency CW power at 20 °C near 3.22 μm.

Original languageEnglish
Article number7886268
JournalIEEE Journal of Selected Topics in Quantum Electronics
Volume23
Issue number6
DOIs
StatePublished - Nov 1 2017

Keywords

  • cascade lasers
  • DFB
  • GaSb
  • high power
  • midinfrared
  • narrow ridge
  • semiconductor lasers
  • type-I QW

Fingerprint

Dive into the research topics of 'Cascade Pumping of 1.9-3.3 μm Type-I Quantum Well GaSb-Based Diode Lasers'. Together they form a unique fingerprint.

Cite this