Skip to main navigation Skip to search Skip to main content

Characterization of proton irradiated 3D-DDTC pixel sensor prototypes fabricated at FBK

  • A. La Rosa
  • , M. Boscardin
  • , M. Cobal
  • , G. F. Dalla Betta
  • , C. Da Vià
  • , G. Darbo
  • , C. Gallrapp
  • , C. Gemme
  • , F. Huegging
  • , J. Janssen
  • , A. Micelli
  • , H. Pernegger
  • , M. Povoli
  • , N. Wermes
  • , N. Zorzi
  • CERN
  • University of Geneva
  • Fondazione Bruno Kessler
  • University of Udine
  • University of Trento
  • National Institute for Nuclear Physics
  • University of Bonn

Research output: Contribution to journal › Article › peer-review

5 Scopus citations

Abstract

In this paper we discuss results relevant to 3D Double-Side Double Type Column (3D-DDTC) pixel sensors fabricated at FBK (Trento, Italy) and oriented to the ATLAS upgrade. Some assemblies of these sensors featuring different columnar electrode configurations (2, 3, or 4 columns per pixel) and coupled to the ATLAS FEI3 read-out chip were irradiated up to large proton fluences and tested in laboratory with radioactive sources. In spite of the non-optimized columnar electrode overlap, sensors exhibit reasonably good charge collection properties up to an irradiation fluence of 2×1015neqcm-2, while requiring bias voltages in the order of 100 V. Sensor operation is further investigated by means of TCAD simulations which can effectively explain the basic mechanisms responsible for charge loss after irradiation.

Original languageEnglish
Pages (from-to)25-33
Number of pages9
JournalNuclear Inst. and Methods in Physics Research, A
Volume681
DOIs
StatePublished - Jul 21 2012

Keywords

  • 3D Silicon radiation detectors
  • Charge collection efficiency
  • Electrical characterization
  • Fabrication technology
  • Radiation hard detectors
  • TCAD simulations

Fingerprint

Dive into the research topics of 'Characterization of proton irradiated 3D-DDTC pixel sensor prototypes fabricated at FBK'. Together they form a unique fingerprint.

Cite this