Electronics Design of the IceCube-Gen2 Optical Module Prototype

The IceCube-Gen2 Collaboration

Electronics Design of the IceCube-Gen2 Optical Module Prototype

The IceCube-Gen2 Collaboration

Physics and Astronomy

Loyola University Chicago
German Electron Synchrotron
University of Canterbury
University of Wisconsin-Madison
Institute of Physics Bhubaneswar
Université libre de Bruxelles
University of Copenhagen
TU Dortmund University
University of Delaware
Marquette University
Friedrich-Alexander University Erlangen-Nürnberg
Harvard University
University of Utah
RWTH Aachen University
South Dakota School of Mines & Technology
University of California at Irvine
University of California at Berkeley
Ruhr University Bochum
Chalmers University of Technology
Uppsala University
Technical University of Munich
University of Rochester
University of Maryland, College Park
University of Padua
University of Kansas
Karlsruhe Institute of Technology
Johannes Gutenberg University Mainz
Georgia Institute of Technology
University of Adelaide
University of Münster
Drexel University

Research output: Contribution to journal › Conference article › peer-review

Abstract

IceCube-Gen2 is a planned extension to the existing IceCube Neutrino Observatory and will provide an order of magnitude increase in the detection rate of cosmic neutrinos by deploying 10,000 sensors in a volume of 8 cubic kilometers. As part of the upcoming IceCube Upgrade, we are developing prototype IceCube-Gen2 sensors to test all components in-situ in preparation for mass production required for IceCube-Gen2. The novel IceCube-Gen2 module will contain up to eighteen 4-inch photomultiplier tubes (PMTs). The signals for each PMT are digitized with a 2-channel, 12-bit ADC (low- and high-gain) at a rate of 60 MSps. In addition, each module contains LED flashers for in-ice calibration, an FPGA for performing in-module local coincidence of PMT signals, and onboard μSD flash memory for buffering data before it is sent to the surface. In this contribution, we discuss the electronics and data acquisition system design.

Original language	English
Article number	1039
Journal	Proceedings of Science
Volume	444
State	Published - Sep 27 2024
Event	38th International Cosmic Ray Conference, ICRC 2023 - Nagoya, Japan Duration: Jul 26 2023 → Aug 3 2023

Cite this

@article{2b5798c1ad154779a37a171bc774d8e6,

title = "Electronics Design of the IceCube-Gen2 Optical Module Prototype",

abstract = "IceCube-Gen2 is a planned extension to the existing IceCube Neutrino Observatory and will provide an order of magnitude increase in the detection rate of cosmic neutrinos by deploying 10,000 sensors in a volume of 8 cubic kilometers. As part of the upcoming IceCube Upgrade, we are developing prototype IceCube-Gen2 sensors to test all components in-situ in preparation for mass production required for IceCube-Gen2. The novel IceCube-Gen2 module will contain up to eighteen 4-inch photomultiplier tubes (PMTs). The signals for each PMT are digitized with a 2-channel, 12-bit ADC (low- and high-gain) at a rate of 60 MSps. In addition, each module contains LED flashers for in-ice calibration, an FPGA for performing in-module local coincidence of PMT signals, and onboard μSD flash memory for buffering data before it is sent to the surface. In this contribution, we discuss the electronics and data acquisition system design.",

author = "\{The IceCube-Gen2 Collaboration\} and R. Abbasi and M. Ackermann and J. Adams and Agarwalla, \{S. K.\} and Aguilar, \{J. A.\} and M. Ahlers and Alameddine, \{J. M.\} and Amin, \{N. M.\} and K. Andeen and G. Anton and C. Arg{\"u}elles and Y. Ashida and S. Athanasiadou and J. Audehm and Axani, \{S. N.\} and X. Bai and Balagopal, \{A. V.\} and M. Baricevic and Barwick, \{S. W.\} and V. Basu and R. Bay and \{Becker Tjus\}, J. and J. Beise and C. Bellenghi and C. Benning and S. BenZvi and D. Berley and E. Bernardini and Besson, \{D. Z.\} and A. Bishop and E. Blaufuss and S. Blot and M. Bohmer and F. Bontempo and Book, \{J. Y.\} and J. Borowka and \{Boscolo Meneguolo\}, C. and S. B{\"o}ser and O. Botner and J. B{\"o}ttcher and S. Bouma and E. Bourbeau and J. Braun and B. Brinson and J. Brostean-Kaiser and Burley, \{R. T.\} and Busse, \{R. S.\} and D. Butterfield and Campana, \{M. A.\} and J. Kiryluk",

note = "Publisher Copyright: {\textcopyright} Copyright owned by the author(s) under the terms of the Creative Commons.; 38th International Cosmic Ray Conference, ICRC 2023 ; Conference date: 26-07-2023 Through 03-08-2023",

year = "2024",

month = sep,

day = "27",

language = "English",

volume = "444",

journal = "Proceedings of Science",

issn = "1824-8039",

}

TY - JOUR

T1 - Electronics Design of the IceCube-Gen2 Optical Module Prototype

AU - The IceCube-Gen2 Collaboration

AU - Abbasi, R.

AU - Ackermann, M.

AU - Adams, J.

AU - Agarwalla, S. K.

AU - Aguilar, J. A.

AU - Ahlers, M.

AU - Alameddine, J. M.

AU - Amin, N. M.

AU - Andeen, K.

AU - Anton, G.

AU - Argüelles, C.

AU - Ashida, Y.

AU - Athanasiadou, S.

AU - Audehm, J.

AU - Axani, S. N.

AU - Bai, X.

AU - Balagopal, A. V.

AU - Baricevic, M.

AU - Barwick, S. W.

AU - Basu, V.

AU - Bay, R.

AU - Becker Tjus, J.

AU - Beise, J.

AU - Bellenghi, C.

AU - Benning, C.

AU - BenZvi, S.

AU - Berley, D.

AU - Bernardini, E.

AU - Besson, D. Z.

AU - Bishop, A.

AU - Blaufuss, E.

AU - Blot, S.

AU - Bohmer, M.

AU - Bontempo, F.

AU - Book, J. Y.

AU - Borowka, J.

AU - Boscolo Meneguolo, C.

AU - Böser, S.

AU - Botner, O.

AU - Böttcher, J.

AU - Bouma, S.

AU - Bourbeau, E.

AU - Braun, J.

AU - Brinson, B.

AU - Brostean-Kaiser, J.

AU - Burley, R. T.

AU - Busse, R. S.

AU - Butterfield, D.

AU - Campana, M. A.

AU - Kiryluk, J.

PY - 2024/9/27

Y1 - 2024/9/27

N2 - IceCube-Gen2 is a planned extension to the existing IceCube Neutrino Observatory and will provide an order of magnitude increase in the detection rate of cosmic neutrinos by deploying 10,000 sensors in a volume of 8 cubic kilometers. As part of the upcoming IceCube Upgrade, we are developing prototype IceCube-Gen2 sensors to test all components in-situ in preparation for mass production required for IceCube-Gen2. The novel IceCube-Gen2 module will contain up to eighteen 4-inch photomultiplier tubes (PMTs). The signals for each PMT are digitized with a 2-channel, 12-bit ADC (low- and high-gain) at a rate of 60 MSps. In addition, each module contains LED flashers for in-ice calibration, an FPGA for performing in-module local coincidence of PMT signals, and onboard μSD flash memory for buffering data before it is sent to the surface. In this contribution, we discuss the electronics and data acquisition system design.

AB - IceCube-Gen2 is a planned extension to the existing IceCube Neutrino Observatory and will provide an order of magnitude increase in the detection rate of cosmic neutrinos by deploying 10,000 sensors in a volume of 8 cubic kilometers. As part of the upcoming IceCube Upgrade, we are developing prototype IceCube-Gen2 sensors to test all components in-situ in preparation for mass production required for IceCube-Gen2. The novel IceCube-Gen2 module will contain up to eighteen 4-inch photomultiplier tubes (PMTs). The signals for each PMT are digitized with a 2-channel, 12-bit ADC (low- and high-gain) at a rate of 60 MSps. In addition, each module contains LED flashers for in-ice calibration, an FPGA for performing in-module local coincidence of PMT signals, and onboard μSD flash memory for buffering data before it is sent to the surface. In this contribution, we discuss the electronics and data acquisition system design.

UR - https://www.scopus.com/pages/publications/85212282492

M3 - Conference article

AN - SCOPUS:85212282492

SN - 1824-8039

VL - 444

JO - Proceedings of Science

JF - Proceedings of Science

M1 - 1039

T2 - 38th International Cosmic Ray Conference, ICRC 2023

Y2 - 26 July 2023 through 3 August 2023

ER -

Electronics Design of the IceCube-Gen2 Optical Module Prototype

Abstract

Other files and links

Fingerprint

Cite this