Skip to main navigation Skip to search Skip to main content

Independent Calibration of Water Vapor Raman Lidar by using Additional Elastic Measurements at Water Vapor Raman Wavelength

  • Decheng Wu
  • , Zhien Wang
  • , Dong Liu
  • , Chenbo Xie
  • , Yingjian Wang
  • University of Wyoming
  • CAS - Hefei Institutes of Physical Sciences

Research output: Contribution to journal › Conference article › peer-review

4 Scopus citations

Abstract

A new method for independent calibration of water vapor Raman lidar by using additional measurements of elastic signals at water vapor Raman wavelength was introduced. The water vapor mixing ratio calibration constant was derived from nitrogen mixing ratio calibration constant and Rayleigh to water vapor Raman backscattering cross section ratio. The nitrogen mixing ratio calibration constant with uncertainties of 1~2% can be determined from the nitrogen mixing ratio measurement in an aerosolfree zone in the upper troposphere with the additional elastic measurement and nitrogen Raman measurement, the Rayleigh to water vapor Raman backscattering cross section ratio can be calculated with uncertainties of about 8%, or can be determined experimentally with uncertainties of less than 5%. Using the experimental cross section ratio, a total uncertainty of the water vapor calibration less than 6% is possible to achieve. Because this calibration method utilizes actual lidar signals in nitrogen and water vapor detection channels, the calibration can fully capture lidar state changes.

Original languageEnglish
Article number25007
JournalEPJ Web of Conferences
Volume119
DOIs
StatePublished - Jun 7 2016
Event27th International Laser Radar Conference, ILRC 2015 - New York, United States
Duration: Jul 5 2015 → Jul 10 2015

Fingerprint

Dive into the research topics of 'Independent Calibration of Water Vapor Raman Lidar by using Additional Elastic Measurements at Water Vapor Raman Wavelength'. Together they form a unique fingerprint.

Cite this