TY - GEN
T1 - Mechanical design and 3-D coupled RF, thermal-structural analysis of normal conducting 704 MHz and 2.1 GHz cavities for LEReC linac
AU - Brutus, J. C.
AU - Belomestnykh, S.
AU - Ben-Zvi, I.
AU - Blaskiewicz, M.
AU - Brennan, M.
AU - Grau, M.
AU - Fedotov, A.
AU - Pai, C.
AU - Snydstrup, L.
AU - Tuozzolo, J.
AU - Veshcherevich, V.
AU - Xiao, B.
AU - Xin, Tianmu
AU - Xu, Wencan
AU - Zaltsman, A.
N1 - Publisher Copyright:
Copyright © 2016 CC-BY-3.0 and by the respective authors.
PY - 2016
Y1 - 2016
N2 - Two normal conducting cavities operating at 704 MHz and 2.1 GHz will be used for the Low Energy RHIC electron Cooling (LEReC) under development at BNL to improve RHIC luminosity for heavy ion beam energies below 10 GeV/nucleon [1]. The single cell 704 MHz cavity and the 3-cell 2.1 GHz third harmonic cavity will be used in LEReC to correct the energy spread introduced in the SRF cavity. The successful operation of normal RF cavities has to satisfy both RF and mechanical requirements. 3-D coupled RF-thermal-structural analysis has been performed on the cavities to confirm the structural stability and to minimize the frequency shift resulting from thermal and structural expansion. In this paper, we will present an overview of the mechanical design, results from the RF-thermal-mechanical analysis, progress on the fabrication and schedule for the normal conducting RF cavities for LEReC.
AB - Two normal conducting cavities operating at 704 MHz and 2.1 GHz will be used for the Low Energy RHIC electron Cooling (LEReC) under development at BNL to improve RHIC luminosity for heavy ion beam energies below 10 GeV/nucleon [1]. The single cell 704 MHz cavity and the 3-cell 2.1 GHz third harmonic cavity will be used in LEReC to correct the energy spread introduced in the SRF cavity. The successful operation of normal RF cavities has to satisfy both RF and mechanical requirements. 3-D coupled RF-thermal-structural analysis has been performed on the cavities to confirm the structural stability and to minimize the frequency shift resulting from thermal and structural expansion. In this paper, we will present an overview of the mechanical design, results from the RF-thermal-mechanical analysis, progress on the fabrication and schedule for the normal conducting RF cavities for LEReC.
UR - https://www.scopus.com/pages/publications/85015308348
M3 - Conference contribution
AN - SCOPUS:85015308348
T3 - IPAC 2016 - Proceedings of the 7th International Particle Accelerator Conference
SP - 525
EP - 527
BT - IPAC 2016 - Proceedings of the 7th International Particle Accelerator Conference
PB - Joint Accelerator Conferences Website (JACoW)
T2 - 7th International Particle Accelerator Conference, IPAC 2016
Y2 - 8 May 2016 through 13 May 2016
ER -