Skip to main navigation Skip to search Skip to main content

Photonic Crystal Surface Emitting GaSb-based Type-I Quantum Well Diode Lasers.

  • Leon Shterengas
  • , Gela Kipshidze
  • , Aaron Stein
  • , Won Jae Lee
  • , Ruyan Liu
  • , Gregory Belenky
  • Stony Brook University
  • Brookhaven National Laboratory

Research output: Contribution to journalArticlepeer-review

Abstract

The GaSb-based epitaxially regrown monolithic diode PCSELs operating near 2 μm at room temperature in continuous wave regime and generating 30 mW of output power from 200 μm diameter aperture have been designed and fabricated. The devices demonstrated CW threshold current density of about 500 A/cm2. The laser output power was enhanced thanks to increased buried void area fill-factor in the photonic crystal layer with multiple voids per unit cell. The PCSEL generated ultra-low divergence donut shape beams at the currents near threshold. At higher injection currents, the device brightness was limited by excitation of the higher order lateral modes. Generation of the vector-vortex beams of different types by different band edge states of the buried photonic crystal was observed.

Original languageEnglish
Pages (from-to)1-8
Number of pages8
JournalIEEE Journal of Selected Topics in Quantum Electronics
DOIs
StateAccepted/In press - 2024

Keywords

  • Etching
  • Gas lasers
  • Laser beams
  • Photonic crystals
  • Semiconductor lasers
  • Surface emitting lasers
  • Waveguide lasers
  • diode lasers
  • epitaxial regrowth
  • infrared
  • photonic crystal
  • surface emitting

Fingerprint

Dive into the research topics of 'Photonic Crystal Surface Emitting GaSb-based Type-I Quantum Well Diode Lasers.'. Together they form a unique fingerprint.

Cite this